big block--What water pump are you using?

What water pump are people using for B/RB engines? I have a street/strip car and was curious to see the opinions. I was either going to go with the flow-kooler, Milidon (but the impellers look cheap to me on the Milidon) or possibly a marine one with a brass 8 fin impeller. I have seen the comparisons on other sites with various types of water pumps and the brass one seemed to flow good. However the flow-kooler or Milidon were not part of the test group. Do you think the anti-cavitation plate is a gimmick?

I have been using the same Milodon pump for 13 years with no issues.

No, it is highly desired. most all my esp is small blocks but for a BB I would get an 8 blader with the plate or add one & just me I think a parts house pump is plenty adequate

I switched from an Eddy to a Flowcooler last year. Seems to work very well.

Flow-Kooler pump has been on my 440 car since 2000. Yes that's 16 yrs now. Still going strong (knock on wood).

Name brand stock replacement.

Never had an issue, ever.

Original rebuilt

Milodon; zero problems.

440 Source Pump. I may switch to the Flowcooler

Napa stock replacement

Same here.. Never a problem....

FlowKooler - worth every penny.

AutoZone stock replacement with life time warranty, no problems.

440 source, 512ci AC, 105 outside temps car runs 185 all day.

I had a FlowKooler on my 440. forgot why i took it off, but when i did, one of the impellers was GONE. never did find it. no BS either. went back to a good old Mopar Performance.