Moparts

rying

Posted By: har

rying - 05/28/16 02:16 AM

having a challenging time to figure this out .i have a 72 demon340 bought a painless wire harness,looking for all the pigtails connectors (headlights,side marker lights,stop/tail/turn,alt,headlamps,volt reg,dist,coil,ign cont unit,h/l dimmer switch) so i don't have to reuse old factory ones so i don't have to cut off original harness.where do i go to get these pigtails.thanx har
Posted By: RapidRobert

Re: rying - 05/28/16 02:51 AM

welcome aboard! www.classicindustries.com MAY have something & they are online. other than that I would Google it
Posted By: OzHemi

Re: rying - 05/28/16 02:55 AM

If the car is stock, using a correct reproduction wiring harness would probably be the better way to go then the painless one. Believe the ones sold by YearOne are the ones to go with.

Aside from that...to get all of the connectors through the car, butchering an old harness would probably be your route to take.
Posted By: astjp2

Re: rying - 05/28/16 08:06 AM

Google Packard 56 connectors http://terminalsupplyco.com/Store/Default.aspx?CATDRILL=DEL010
© 2024 Moparts Forums