Part Numbers Needed-DISC BRAKES 66-72 A Body Cars

Does anyone have part numbers for the INNER wheel bearings, and races, or a complete bearing and race set for the Kelsey Hays 4 piston disc brake set assemblies that were used on the 66-72 A body cars?
Also need a part number for the grease seal in the hub.
I somehow lost my "cheat sheet" that i had all the necessary part numbers written down on for my reference.
All the parts stores don't show anything anymore in their books or computer programs, for the DISC BRAKE equipped cars. Only shows parts for drum brakes.
Any part number will do from any manufacturer that i can use to cross reference, Timken, Bower, NAPA.
Thank's in advance for any numbers.

RockAuto

http://www.rockauto.com/catalog/x,carcode,1088186,parttype,1672

Rock Auto is only showing parts for Drum brake cars. Nothing for Discs.
I previously looked there.

Here is a link to some Timkin bearings. I recently had to replace them on my car. Timkin Bearings

I didn't think this was going to be that difficult of a request.
Figured someone out there in Mopar land would have written down, or saved the packaging that the parts came in.
That site listed parts for drum brakes only, also.

Quote:

---

I didn't think this was going to be that difficult of a request.
Figured someone out there in Mopar land would have written down, or saved the packaging that the parts came in.
That site listed parts for drum brakes only, also.

---

Where on that site does it specify for drum brakes only? According to the FSM, the front Kelsey-Hayes disc brakes are 11".