HOW TO GET MY HORN TO WORK!

my 72 roadrunners horn wont work!!!!

i dont get it?

there is a loose wire sticking from the inside when i pull the wheel off, and it has a round end with a hole through the middle like it goes over a bolt and tightened down with a nut?

anyone know?

that black wire grounds the horn relay which sends fire to the horns. Ground it & see if horn(s) blow then see what parts are missing to make the horn ring on the steering wheel ground it(like you just did) to the round copper contact ring inside/under the steering wheel. Most of the black wire terminal ends are a flat 1/4" female spade conector. EDIT I just reread your post & that wire is(probably) not the(black) ground wire & DO NOT ground it! until you are sure which is which.