Posted By: Coke
Twist on breather valve - 03/13/16 03:16 PM
Hello
Where could i buy a twist on brether valve for mounting in the place of the pass side oil filler cap,
I can,t find one with tube
Less for a reasonable price.
Posted By: jlatessa
Re: Twist on breather valve - 03/13/16 04:12 PM
I've only seen the push-on type, you'll need a rubber grommet, and those are available.
I have a new one (breather) that I'm not using I'll ship to you for only shipping costs.
Don't know if that's a good deal for you, but if you can't find one over there, it's an option.
Anything for a fellow Spaniard; Grandmother's maiden name was Maiarano.
Joe
PS Megaparts has both the breathers and the grommets, the breathers don't look like mine and they're $60 for the chrome ones, so if you want to order the grommets from them and pay for the shipping for my Chrome breather, your call.
Joe
Posted By: Coke
Re: Twist on breather valve - 03/13/16 04:23 PM
Thanks Joe
I also have a push in valve from the covers that i had before but these do not fit on the MP covers.
Besides,the grommets didnt last very much.
I also was thinking to make a hole on a filler cap and MIG weld the push in valve.
Posted By: Coke
Re: Twist on breather valve - 03/13/16 06:45 PM
Nice
Being for chevy,Will it fit on the MP covers?
Posted By: tman
Re: Twist on breather valve - 03/13/16 10:06 PM
I had those exact MP covers and the bigger grommet fit, unless my memory serves me wrong.
Posted By: Supercuda
Re: Twist on breather valve - 03/14/16 03:02 AM
Fits Valve Cover Hole Size: 1.220 in.
Read the description and you can check your covers and tell us if it'll fit.
Read the reviews.