Trying to swap out valve springs on edelbrock heads, engine in car. The compressor I have won't work with the dual valve springs, any ideas on one that will?
Looks like it bolts into the shaft mounting holes and uses a cheater handle with a fork? Wonder if I could build one......damn budget. Thanks for the link!
Yes just weld a pair of ears to a plumbing "T" with a pipe nipple screwed into it for a handle. Use a short/stout dummy horizontle shaft & bolt it to 2 saddles at a time. EDIT A small telescoping magnet works VG for snatching the keepers
Looks like it bolts into the shaft mounting holes and uses a cheater handle with a fork? Wonder if I could build one......damn budget. Thanks for the link!
If you build your own, just make sure the handle doesn't hit the master cylinder on #7 when you compress the springs.