Posted By: Anonymous
1969 B BODY A/C WATER CONTROL VALVE??? - 01/29/09 06:04 PM
Does anyone have a picture of the placement of the factory A/C vacuum controlled water valve for 1969 B body cars?
Quote:
I have a 69 gtx with air that is not the one i have.I think it may be for a e body 1970 and up not sure.But it is not for a 69 b body with air
Quote:
Go back to the link and read it again. It says "A/C Water Valve 1969-73 C-Body and 1971 B-Body". That's 71 B body only.
Quote:
Go here for heater valves www.vapinc.com then click on mopart parts then find heater valves
Quote:
Mine looks like H1279
Quote:
Here are pics of the correct valve. It is manually operated, not vacuum like that on the 1970 version of the valve.
Can you pst a pic of your engine compartment showing the right side fire wall assembly?
Quote:
Here is the 2nd pic showing the actual water valve assembly. These valves are a Ranco brand.
Quote:
If I am not mistaken the style valve that you may have is located on the heater core itself. Looks like your car has no A/C.
I have a 68/69 B-body heater core. There is a lever that opens and closes the valve. A control cable connects to it. I can take pics of this valve for you tomorrow so can see what it looks like.
The assembly you have pictured is not for the B-Body cars.
Quote:
Factory air equipped B-bodies from 1966 thru 1970 The water valve IS mounted to the firewall, with the backside of the valve actually protruding thru the firewall itself into the interior of the car. All valves from 1966 thru 1969(not sure of the 1970 valves ) ARE cable controlled.
This valve is designed to mount to the passenger side inner fender ala E-body and 71 up B-body. And regardless of what someone says or states is NOT correct for anything 1969 b-body in any way shape or form
This appears to be the correct style valve for 1969
The correct valve mounts to the firewall with 3 of these screws
Quote:
Now the question is, are there any replacement valves out there for this?
Quote:Quote:
Now the question is, are there any replacement valves out there for this?
Hard to find piece.
NOS = very hard to find + expensize when you do
Aftermkt = replacements used to exist,but didn't have the thermostatic control connection on it that goes to the bottom of the box
Used = Not real tough to find, but may(read will) need rebuilt
A friend of mine used to have a couple of them NOS, I'll ck and get back to you if he does (BUT, he has the cars they fit so don't get your hopes up)
Quote:
NAPA sells a seal kit for these for $10 or so. I think it consists of the round rubber diaphragm & a washer
Below is where it mounts on a 69 Charger firewall
Quote:
NAPA sells a seal kit for these for $10 or so. I think it consists of the round rubber diaphragm & a washer
Below is where it mounts on a 69 Charger firewall