front end cam bolt question

Posted By: mikemee1331

front end cam bolt question - 10/11/15 11:02 PM

replacing the old crusty cam bolts on my RR and was faced with a choice, Plus / Minus 2-1/2 Degree Camber from NAPA or 1 1/8 from AdvanceAuto. is this THAT critical. i'd rather go with NAPA

Yes upper control arms

Posted By: Supercuda

Re: front end cam bolt question - 10/12/15 12:02 AM

I assume you mean upper control arm adjusting bolts and not camshaft retaining bolt(s)?

If the UCA bolts, more is better abd I agree with NAPA over AA.

Posted By: Magnum

Re: front end cam bolt question - 10/15/15 02:54 AM

More is better