Moparts

70 challenger 4-speed console part#

Posted By: mikeporp

70 challenger 4-speed console part# - 09/02/15 11:35 PM

Can someone tell me what 1970 car a center console with the part #3516 and assy#3507 78364 came out of. I'm looking for a 4-speed console for my 70 challenger. I found one with these # the guy said he was told it came out of a cuda, but it looks just like the 70 challenger one. Are they the exact same part# or was he given bad info. I've seen either a 70 cuda or barracuda center console and it looked different. It had a white groove in it and going over the console door. Thanks
Mike
Posted By: 71GTX471

Re: 70 challenger 4-speed console part# - 09/03/15 02:17 AM

1970 is a 1 year only console they have the seatbelt buckle holder in the back instead of an ashtray,as fare as 4spd goes it needs to have the cutout/contoured section on the left side bottom of console to fit along the floor hump also the contoured top plate for shifter boot, will also have the lanyard for the compartment door if its still present.
Posted By: mikeporp

Re: 70 challenger 4-speed console part# - 09/03/15 03:16 AM

Thanks for the reply. My main question is. Is the 70 cuda and 70 challenger the exact same console. Thanks.
Mike
Posted By: Morty426

Re: 70 challenger 4-speed console part# - 09/03/15 06:42 AM

Originally Posted By mikeporp
Thanks for the reply. My main question is. Is the 70 cuda and 70 challenger the exact same console. Thanks.
Mike


Yes 70 is the same between Dodge and Plymouth.

4 speed and automatic are different
Posted By: mikeporp

Re: 70 challenger 4-speed console part# - 09/03/15 12:56 PM

Thanks for the info
© 2024 Moparts Forums