Torque specs

Anyone know the factory torque specs for an Abody k frame? For the 4 bolts that hold it on?

OT before removing those bolts I would highly suggest drilling a small hole (4) in the subframe(s) and shooting some pb blaster in on the threads over several days so if the bolt is super tight (& alot are) thet you dont rip the female threads apart on the inside where you cant get to em to repair that damage. Cant say I've seen a spec for them but a person could get the torque spec for a grade 8 coarse thread bolt of that diameter & go with that. Here's a BTT for ya

I pretty sure E body is 150 ft lbs but I`m not sure on A body.

I am going to strickly WAG but I think they use the same bolts