Posted By: TONY_DAGOSTINO
426 hemi pushrod length, hydraulic vs solid - 01/21/09 01:43 AM
hi all
does anyone know the length of hydraulic 426 hemi pushrod length vs solid pushrod length?
i know intake + exhaust pushrods are different length too
thanks, tony
Posted By: quickd100
Re: 426 hemi pushrod length, hydraulic vs solid - 01/21/09 02:22 AM
Tony; Here's the MP measurements, (double check them)
Hydralic intake 10.47"
''''''' exhaust 11.45"
solid intake 10.65"
''''' exhaust 11.58"
Of course any milling will change these figures. It's best to buy a set of checker pushrods and have some customs made up. Smith Bros. are exellent and fast. Dave
Posted By: TONY_DAGOSTINO
Re: 426 hemi pushrod length, hydraulic vs solid - 01/21/09 02:36 AM
hi thanks for the info
i just checked crane and see the following
solid pushrods 10.843 + 11.781,
hyd 10.656 + 11.437
so, either way it seems that the hyd pushrods are .2"-.35" shorter that solid pushrods
thanks again for the help
tony