Posted By: 440challenger
Reverse MVB with stock slapstick? - 01/19/09 12:35 AM
Been wanting to know for a while if this is possible. I have a stock console/slap stick shift aseembly in my challenger with a Reverse manual valve body in the trans.
My 1-2 shift i have to do VERY gently so i do not go into 3rd. Is there a way to convert my slapstick to work with my MRVB?
Posted By: VT_Dart
Re: Reverse MVB with stock slapstick? - 01/19/09 12:40 AM
Although probably not very helpful, there is a company that makes new plates to do just what you're looking for. I was looking at one for my Dart, but I can't for the life of me remember the website. Hopefully someone will post it, as it was a very cool product you can't really find anywhere else.
Posted By: prochargedhemi
Re: Reverse MVB with stock slapstick? - 01/19/09 04:03 AM
turbo action now makes a valve body that is forward manual vavle body. i have one and works fine with a stock slap stick
Posted By: 440challenger
Re: Reverse MVB with stock slapstick? - 01/19/09 02:11 PM
yeah i really wasnt looking to change the vb in the trans... before i would to do that, i would just put a quater stick in the console.
has anyone modified the stock shift gate to work maybe?
Posted By: aarcuda
Re: Reverse MVB with stock slapstick? - 01/19/09 03:34 PM
my auto/manual turbo action forward VB works great. Nice crisp shifts. and it feels much better than the bm shift kitted vb I had in there
Posted By: dvw
Re: Reverse MVB with stock slapstick? - 01/19/09 06:06 PM
I made one years ago by studying how the stock parts worked. You have to refile the 2nd and 3rd (former 1st) detents on the shift plate. As I remember I filed them upward (this was over 25 years ago). Then I fabbed the little spring loaded part that stops the the handle detent. It stops the detent in the handle and then pulls it upward. I know this is not a complete instruction. I built this when I first started hot rod stuff. I was young and had no money. It worded very well and didn't take long to figure out.
Doug
Posted By: WILD BILL
Re: Reverse MVB with stock slapstick? - 01/19/09 07:02 PM
I don't suppose you have any pics of that do you?
Posted By: 440challenger
Re: Reverse MVB with stock slapstick? - 01/19/09 11:50 PM
i think im going to give that shift-r-gate a try for the 30 bucks....