Posted By: duckblind
cooling fan to water pump bolts - 06/12/15 01:25 AM
Does anyone know the size bolt/length to connect the cooling fan to the water pump on a 68 440?
Thanks
Posted By: RapidRobert
Re: cooling fan to water pump bolts - 06/12/15 05:23 AM
not sure of the OE dia/length but I'd measure the length needed to reach near the end of the rear side of the WP "cross". you have the fan the pulley the spacers (if used) & the cross & probably washers, Mancini or 440 source etc might have kits of those 4 bolts (would hurt to double check the length needed for your app). EDIT grade 5 is plenty