Posted By: bfury
Plymouth Prowler Engine Swap - 04/19/15 06:40 PM
Does any body know of an engine mount kit to put a new hemi or 340/360 in a prowler? Any leads or details appreciated.
Posted By: RodStRace
Re: Plymouth Prowler Engine Swap - 04/22/15 03:01 AM
The factory did it with the Howler.
There have been others that swapped magnums in. The BIG problem is the rear mounted transaxle, which can only handle so much.
There were a few swaps outlined online a while back when I looked at it (dreaming). Also saw one at MATS a couple years back.
http://www.conceptcarz.com/vehicle/z732/Chrysler-Howler-Concept.aspxhttps://www.youtube.com/watch?v=QMoR3_USdUghttps://www.youtube.com/watch?v=tFfIho5mCw0
Posted By: 340duster340
Re: Plymouth Prowler Engine Swap - 04/22/15 04:55 PM
I would do a srt 4 swap on that over v8.
Posted By: bfury
Re: Plymouth Prowler Engine Swap - 04/24/15 02:06 PM
Thanks. Turns out the car I was looking at needed suspension parts that were supposedly not available. Owner is an out of state dealer so I will wait until fall when I am back in Daytona to se if it is still here. I was hoping it had a blown engine and be available cheap. No such luck.