Bracket for heater core....how does it get installed

Posted By: 71rm23

Bracket for heater core....how does it get installed - 01/12/09 02:48 PM

I'm restoring my heater box. I have a new heater core for my RR. There's a bracket on the old one that attaches to one of the two tubes and is held in to the box with a screw/bolt. Anyway, the bracket came off. Is the bracket soldered to the tube or welded? I have a solder torch, resin, and solder but no welder if it needs to be welded. Or should I take it to a radiator shop?

Thanks in advance!

Posted By: 71rm23

Re: Bracket for heater core....how does it get installed - 01/12/09 05:27 PM

Anyone?

Posted By: rhad

Re: Bracket for heater core....how does it get installed - 01/12/09 05:32 PM

it is soldered,it dont take much heat,take it to a shop!