new dana 60......Moser or Strange???

Which one would you recommend, Moser or Strange dana 60? I want the pinion snubber, and a good axle with some sort of posi, no spool.

Go with DoctorDiff (Cass Eslick).
Just about everyone on MOparts including myself have used his services and he is very professional, reasonably priced and definitely has Mopar knowledge.

Here is his e-mail addy: doctordiff@gmail.com

Cass, or Moser, or DTS....Strange leaves a lot to be desired, plus their axle ends sometimes interfere with your wheel choice, esp Chry Ralleys,or 15" steelies, because the axle hub is to large, fitting drums can be a problem too,

I recently put a new Mosher Dana with a Truetrac and pinion snubber I bought a couple years ago into service. I don’t have a bunch of miles on it yet, so far no complaints.

Because I'm a Strange Engineering dealer, I build assemblies around their housings and also drop-ship many S-60 complete assemblies. I have never run into a problem with the quality and/or wheel/brake fitment.

In fact, Strange-60 castings are my choice. No other design has screw-type carrier adjusters incorporated into the housing.

I'll join the group of guys that has bought and will buy from DoctorDiff.