Posted By: 71birdJ68
Head gasket - 02/10/15 06:59 PM
I put a MLS on, and installed, and torqued the head, but I need to recheck something. The eng hasn't been started, so the question is could I pop the head off, and look at what I need to and reuse the head gasket?
Posted By: rickseeman
Re: Head gasket - 02/10/15 07:24 PM
People do it all the time.
Posted By: HemiRick
Re: Head gasket - 02/10/15 08:18 PM
Sure even if it was a Felpro. Those good gaskets are made to be reused.
Posted By: 71birdJ68
Re: Head gasket - 02/11/15 12:35 AM
Thanks for the answers, it's a Victor gasket on a Neon by the way.
