Moparts

Anyone restore a Ramcharger Assembly?

Posted By: vinnyd76

Anyone restore a Ramcharger Assembly? - 01/13/15 07:10 PM

The original Ramcharger from my 1970 Dodge Coronet R/T could use a refreshing. Has anyone restored one? Any businesses specialize in this type of restoration? The fasteners that hold the upper/lower sections half a star end? Does anyone repop these? Please reference photo on the star fastener.

Attached picture 8394852-Shelby-20150112-00019.jpg
Posted By: vinnyd76

Re: Anyone restore a Ramcharger Assembly? - 01/13/15 07:13 PM

Star fastener pick

Attached picture 8394855-MadisonHeights-20150112-00013.jpg
Posted By: JohnRR

Re: Anyone restore a Ramcharger Assembly? - 01/13/15 07:18 PM

Quote:

Star fastener pick



could you make that picture more blurry please, I can almost make it out ...
Posted By: 70NetRT

Re: Anyone restore a Ramcharger Assembly? - 01/13/15 08:27 PM

This has been covered in numerous posts in the past. Type "Ramcharger airbox" into the search box beside the Moparts logo at the top of the page and you will be reading for a while. Keep in mind the 69 air boxes were similar except for how they attached to the hood.

Here are a few to get you started:

post 1

post 2

post 3


I have a 70 Ramcharger hood for my RT that I hope to restore this summer and found this info most useful

Paul
Posted By: vinnyd76

Re: Anyone restore a Ramcharger Assembly? - 01/14/15 02:34 AM

Thank you for the information! Sorry about the photo quality. I will have to take another photo of the bottom portion of the fastener. Below is another pic of the top showing the opposite end of the star.

Attached picture 8395446-SterlingHeights-20150112-00012.jpg
Posted By: DPelletier

Re: Anyone restore a Ramcharger Assembly? - 01/14/15 06:01 PM

Quote:

This has been covered in numerous posts in the past. Type "Ramcharger airbox" into the search box beside the Moparts logo at the top of the page and you will be reading for a while. Keep in mind the 69 air boxes were similar except for how they attached to the hood.

Here are a few to get you started:

post 1

post 2

post 3


I have a 70 Ramcharger hood for my RT that I hope to restore this summer and found this info most useful

Paul



Good job posting that. The first thread from Quickshft should be a sticky....



Dave
Posted By: MarkMcDonald

Re: Anyone restore a Ramcharger Assembly? - 01/15/15 04:26 PM

Russ Jinkins www.restorationfullcircle.com
© 2024 Moparts Forums