Posted By: Dr Dave
Driveline angles - 12/07/14 11:11 PM
I have a 71 Hemi Cuda clone with Alter K and Tremic 600 5 speed trans and 8 3/4 (for now) rear that I am setting up. I have 4 * down in the tailshaft of the trans, 1* down towards the rear on the driveshaft and 0* pinion.
Are these acceptable angles? I thought the pinion should point down.
Also, what's your thoughts on pinion snubber, get an adjustable or keep stock? Car will be 99% street, but driven.
Are these acceptable angles? I thought the pinion should point down.
Also, what's your thoughts on pinion snubber, get an adjustable or keep stock? Car will be 99% street, but driven.