Moparts

After market gauges

Posted By: lilmoose102

After market gauges - 11/02/14 04:15 PM

Looking to install an oil pressure gauge and temperature gauge under the dash of my 70 roadrunner. Any input on what gauges you guys are using and if possible what gauges will work with the sending units presently in the engine,(440) thanks !
Posted By: mikemee1331

Re: After market gauges - 11/02/14 04:33 PM

Quote:

Looking to install an oil pressure gauge and temperature gauge under the dash of my 70 roadrunner. Any input on what gauges you guys are using and if possible what gauges will work with the sending units presently in the engine,(440) thanks !



I've had Sunpro for years. mine are mounted on the outside of the car though. they are the 3.5 inch with chrome (shoulda went with black) ones. at the time they had the only parts store available ( no Internet back then!)tach that would work with my MSD without the adapter.
Posted By: therocks

Re: After market gauges - 11/02/14 05:10 PM

Almost all if not all aftermarket gauges use their own senders.Some are close to stock.I run Summits gauges all mechanical.Mine have been in at least 10 years and no problems.I run a Auto meter fuel pressure gauge and tach though.Rocky
Posted By: mikemee1331

Re: After market gauges - 11/02/14 05:23 PM

Quote:

Almost all if not all aftermarket gauges use their own senders.Some are close to stock.I run Summits gauges all mechanical.Mine have been in at least 10 years and no problems.I run a Auto meter fuel pressure gauge and tach though.Rocky



I don't remember having to switch them? but it was 25+ years ago ? I also don't remember what I had for dinner last night!
Posted By: lilmoose102

Re: After market gauges - 11/02/14 06:07 PM

Thanks
© 2024 Moparts Forums