Best place to buy steel bumpers for 64 Belvedere ?

Posted By: JC Childress

Best place to buy steel bumpers for 64 Belvedere ? - 09/17/14 06:17 PM

I have a 64 Belvedere and its need of some nicer bumpers. I talked to Tri - City plating. Does anyone know of any other place to buy them ?
Thanks a bunch.

Posted By: JC Childress

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 03:38 PM

I cant believe they are this hard to find. Anyone ?

Posted By: bigdad

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 04:12 PM

Might have better luck some other place than the race forum

Posted By: tboomer

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 04:37 PM

Quote:

Might have better luck some other place than the race forum

Yupp...A classified ad in B body parts wanted will work!

Posted By: gtea1901

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 04:56 PM

JC try the bumper boyz 1 800 815 9009

Posted By: therocks

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 06:01 PM

Bumper Boys dont walk run very very fast away.Ive heard nothing but problems about them.Tri City always good reviews and a decent price.rocky

Posted By: Leigh

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 06:19 PM

Have a local shop work them. Check with some body shops, for a rechromer in your area.

Posted By: cudaman1969

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 11:41 PM

Quote:

Might have better luck some other place than the race forum

What forum do you think you are you on? This is Moparts question and answers, not the racing forum.

Posted By: jake4cars

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/18/14 11:44 PM

Quote:

Have a local shop work them. Check with some body shops, for a rechromer in your area.

this is good advice if you choose not to go the tri-city route, RUN, as fast as possible from bumper boys

Joey

Posted By: bigdad

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/19/14 12:42 AM

Quote:

Quote:

Might have better luck some other place than the race forum

What forum do you think you are you on? This is Moparts question and answers, not the racing forum.

The mods moved it here dipstick

Posted By: Triggerfish

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/19/14 03:16 AM

I called this guy for front & rear bumpers for my 64 Belvedere & his listing price is without a core. I think he said $150 off if you send your bumper sa a core. http://www.ebay.com/itm/1964-Plymouth-RE...500&vxp=mtr

Talked to some chrome vendors at Hot August Nites who have shops in so cal &
their prices to straighten & rechrome mine were between $350 & $450, so
I might go that route. Bumpers are a lot easier to find for these 64's than interior door panels or seat covers!

Posted By: TJP

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/19/14 03:43 AM

CHEAP?? Bumper boyz,
or GOOD??? TRI CITY, Hmm spend you money wisely or you'll spend it again

TRI CITY ROCKS In my EXPERIENCES (YES that's multiple)

Posted By: cudaman1969

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/19/14 06:19 AM

Quote:

Quote:

Quote:

Might have better luck some other place than the race forum

What forum do you think you are you on? This is Moparts question and answers, not the racing forum.

The mods moved it here dipstick

Wow... Was the dipstick part really needed? Did both our questions annoy you?

Posted By: dvw

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/19/14 02:07 PM

Mine has Bumper boys on it. The rear one was nice, the front one is OK at best. I had them for 2 years and unwrapped them. Then I realized there are swirls under the chrome layer. They wanted no part of replacing it, too old.
Doug

Attached picture 8274701-DSC_3651.JPG

Posted By: cudaman1969

Re: Best place to buy steel bumpers for 64 Belvedere ? - 09/19/14 11:20 PM

Quote:

I have a 64 Belvedere and its need of some nicer bumpers. I talked to Tri - City plating. Does anyone know of any other place to buy them ?
Thanks a bunch.

Get your chrome done in NC.or Tenn. maybe some other southern states. They still do the full process, Va and Pa i know of are restricted from using whatever coat it is, EPA.