Best source for Ign. Tumbler and Door Locks, D100

Hey Guys,
I have a snapped of Key to my 77' D100, I need new door locks and ignition tumbler. What is the best source for these? Thanks

I'm wondering if you can fish the broken off key shank out of the cyl with a magnet or a drop of super glue on a thin rod then take the shank & the head in & see if he can cut a duplicate key with it being broken in two. But the Q is what made it snap, is the lock messed up (ign lock I am assuming)

close and local\



Keywest Lock & Safe Inc

Locks & Locksmiths
623-932-4220


Address



215 N Litchfield Rd

Phone Number



Goodyear, AZ 85338-1249

You would think people never heard of locksmiths.Unless the locks are totally trashed its usually the best option.Rocky

Robert, I would try that if I didn't break the end off the Key trying to poke a hole in a plastic case holding a new car charger.... DOH! Oh well live and learn, I thought to myself "this is a bad idea".... it was! Haha thanks for the suggest on the local place, right down the road I will have to give them a call!

Bets part is if the doors and ignition are the same key you just need to pull the ignition.The key will be made to fit it and the doors.Last keys I had made for my 57 that didnt have a trunk key was under 25 bucks for 3 trunks and 2 Ignitions.The guy even pulled the trunk lock.Rocky