Posted By: FFwithRT
Removing the console in 65 sport fury - 08/03/14 12:03 AM
where are the bolts/screws that need to be taken out to remove my console? (1965 Sport Fury 4-speed) Thanks in advance, Greg
ffgreg32@aol.com
Posted By: 1E2C
Re: Removing the console in 65 sport fury - 08/03/14 12:58 AM
If you lift up the flap on the bottom edge of the carpet you'll find 2 screws on each side front and rear. The front one is just forward of the shifter handle/side bump and the rear one is right at the back end of the console.
Mike
Posted By: 1E2C
Re: Removing the console in 65 sport fury - 08/06/14 04:19 AM
Oh yeah, you don't need to take the screws all the way out, the holes are open bottomed or slots in the console so if you just loosen them a few turns the console will lift off.