Where to find this throttle cable adjuster combo?

Guys,

I'm converting my stock Mopar throttle/kickdown setup to a cable driven one. However, given that I need to make a few adjustments I need to get a few extra pieces. Pictures below show the setup I'm using. The 2 end adapters is what actually hooks up to the carb throttle lever and/or trans kick-down level. I can't for the life of me find the adjuster 'rod/screw' with a set screw - the piece in the picture below circled in RED - (proper name is???)...this is where the cable end goes into, then the set screw tightens it down, this 'screw' then goes into the adapter with the 1/4-28 stud in it.

Any ideas where the heck to find this? I see that Summit/Jegs show the end piece, many combos, but I can't find the other piece anywhere. I'm thinking of trying a bike/motorcycle shop next...

Not sure what you need, could you use some allthread rod with some "JAM" nuts between the two pieces to get some extra length.

Lokar sells this..



Looks similar to what you have...would give you the bit with the setscrew at least?

Yup, this is good...bummer about the price...man, $23 for that piece alone?

Well, I'll check a few more local places first.

Thanks again guys!