1973-74 RR Wheel well trim fastener?

I takes a spring clip simular to a door panel clip

Know where I can get some? Thanks

anyone know where I can get these fasteners?

Not sure what you have near you but most local auto body supply shops have a display with different styles and types of clips..Spring clips included...That way you can take the trim along for the correct size..

Thanks - Ill try that out, Just want it on the car ASAP since it worth more than my life!

I was lucky...The 73 RR I restored did'nt have the wheelwell trim...The finding headlight buckets and rear bumper trim were all the fun I needed..

Sweet ride - I came very close to just filling the holes in but I thought it would look really sharp with the trim... searched for months finally go it but didnt have clips cause they weren't on a car.

Well, here is some pics for ya.

I lucked out and was able to reuse most of mine after a repaint.
And I was able to get some more from a junkyard car 3 years ago that had some still on it.

Unfortunately I don't know who is making them, but there are some large fastner companies out there.
As somebody said, you might try a local paint supply shop, as they might have a book to look them up or maybe have some pictures or better yet a display board with different fastners on it.

And the rear wheel trim, on the very bottom ends should have holes for screws. I thought it was weird that it was done that way.

Oh, I don't suppose that where you found your trim, that they might have more? I could use a set of rear wheel trim.

Another, these are chrysler OEM clips from the junkyard car.

That is what mine look like.

Here is a pic of the rear trim holes.Instead of a hole in the end of the trim like the rear, the front trim pieces use a clip that has a threaded screw which fits though a hole in the lower wheel well and a sheet metal nut on the inside.

Awesome! Pictures help a lot! And yes the back ones do have holes for screws, I assume they use the stainless screw with rubber on the back?

I got really luck on the trim - guy was selling a satellite on eBay with trim on and I asked about them, turned out he had a whole other set that don't appear to have been on a car. Only problem was no fasteners!

Another question, is the black insert painted, mine have some small scratches in the black but in other spot it almost looks like a thin black rubber or something?

Here's the spring clip

another view

Should clean up after hitting it with a small wire brush in a Dremel tool. The nut sometimes has a (usually?) plastic crown (not shown).

Not really able to find sets of these, I found a guy who has them NOS for all 4 wheel wells for $100... seems to be a little much but I am wondering if it would be worth it to just have the right clips... thoughts????

Anyone?