Moparts

dual point distributors

Posted By: mickm

dual point distributors - 03/07/14 09:11 PM

which big blocks had them? in the 66-71 range? hemi's and 6 pak engines, any others?
Posted By: GTX MATT

Re: dual point distributors - 03/07/14 09:14 PM

440 4 barrel 4 speed cars
Posted By: 70440+6bbl

Re: dual point distributors - 03/07/14 09:15 PM

Also, '68 and '69 4-spd 440 4bbl. Not sure about '67 though.
Posted By: 70440+6bbl

Re: dual point distributors - 03/07/14 09:17 PM

Quote:

440 4 barrel 4 speed cars




'70-1 440 4bbl 4-speed had single points.
Posted By: GTX MATT

Re: dual point distributors - 03/07/14 09:42 PM

'67 Yes, '70 and '71 I did not know that about. You learn something new every day
Posted By: mickm

Re: dual point distributors - 03/08/14 12:43 AM

yup, you do!

thanks everyone!
Posted By: HemiSportFury

Re: dual point distributors - 03/08/14 02:09 AM

'64 383 four barrels had them too. Not RB but if the 383 had them probably the 426 wedges would too.
Posted By: Ramrod39

Re: dual point distributors - 03/08/14 02:27 AM

My '69 Dart Swinger 340 and '69 Road Runner 383 both had them.
Posted By: AZ_A12_BEE

Re: dual point distributors - 03/08/14 05:11 AM

Quote:

Quote:

440 4 barrel 4 speed cars




'70-1 440 4bbl 4-speed had single points.




All A12s both autos and 4 speeds
Posted By: JohnRR

Re: dual point distributors - 03/08/14 06:32 PM

Quote:

My '69 Dart Swinger 340 and '69 Road Runner 383 both had them.




somebody put it in the 69 Roadrunner because that 383 would not have had one installed by the factory unless someone put an A body 383 in it ... then it would have had the wrong pan and exhaust manifolds too.
Posted By: dynamite

Re: dual point distributors - 03/08/14 09:15 PM

Our 64 HP 383 had dual points..

Attached picture 8066543-jack2.jpg
Posted By: Joesixpack

Re: dual point distributors - 03/08/14 09:26 PM

Dual Points used in
1971 340-4 manual,
1971 440+6
1971 426H
1962-1963-1964- 361,383,413,426W
1965-1970 273-383-413-426W-426H-440
Still sell quite a lot of caps,rotor,points&condensers for them
Posted By: JohnRR

Re: dual point distributors - 03/09/14 04:53 PM

Quote:

Our 64 HP 383 had dual points..




That's nice but it's not a 69 Road runner with a 383 and someone claimed something that is not true.
Posted By: Ramrod39

Re: dual point distributors - 03/11/14 05:50 AM

Quote:

Quote:

My '69 Dart Swinger 340 and '69 Road Runner 383 both had them.




somebody put it in the 69 Roadrunner because that 383 would not have had one installed by the factory unless someone put an A body 383 in it ... then it would have had the wrong pan and exhaust manifolds too.




Don't know if it was factory or not but the RR had a Chrysler dual point in it when I bought it...
Posted By: JohnRR

Re: dual point distributors - 03/11/14 03:21 PM

Quote:

Quote:

Quote:

My '69 Dart Swinger 340 and '69 Road Runner 383 both had them.




somebody put it in the 69 Roadrunner because that 383 would not have had one installed by the factory unless someone put an A body 383 in it ... then it would have had the wrong pan and exhaust manifolds too.




Don't know if it was factory or not but the RR had a Chrysler dual point in it when I bought it...




I can tell you with 1000000% certainty that it was not installed by the factory in a 69 RR with a 383.
© 2024 Moparts Forums