Posted By: scotman1955
A833 trans problem - 12/26/08 02:35 PM
SLIPS OUT OF GEAR EVERY TIME I LET UP ON CLUTCH IN REVERSE ONLY.IS IT TRANS OR LINKAGE WHAT DO YOU THINK
Posted By: 68CoronetRT
Re: A833 trans problem - 12/26/08 02:54 PM
check you linkage adjustment it may not be fully engaging the gears.
Posted By: doctor_mopar
Re: A833 trans problem - 12/26/08 02:55 PM
I would put it in gear without engine running, then get under the car and check the reverse lever, and make sure it is moving all the way into reverse. You may have to disconnect the lever from the shift rod to see if it will move farther.You could have a shifter problem also. It would be nice if you had a helper operate the shifter while you check the movement. If you see it's an adjustment problem, it will be obvious what to do.