RB Demon carb linkage

Does anyone have a good photo they could post?

I picked up the P.A.W. Demon Throttle Lever Bracket. It seems to fix my cable alignment issue (moves the attach point further outboard) but I am still not clear how the throttle cable/return spring/kickdown linkage should attach.

Thanks in advance for your help.

I don't have a picture but i will get one when i get home for you.

I used the stock rod/screw on my challenger it goes into the top hole on the adapter you have.
on end on the inside is short for the throttle cable and the other is longer and you sild the kick down linkage on.

Here is a link it is for a six barrel but you can see the black screw in the middle that is what you need.

http://cgi.ebay.com/ebaymotors/Throttle-...bayphotohosting