Posted By: calexan
Cast iron headers for max wedge heads - 01/18/14 06:50 AM
Can i put cast iron headers made for max wedge heads on my regular big block heads?
Cast iron headers for max wedge heads
Posted By: bobby66
Re: Cast iron headers for max wedge heads - 01/18/14 07:18 AM
Yes. Might have clearance problems in a later car, though. 
Posted By: Goat330
Re: Cast iron headers for max wedge heads - 01/18/14 07:18 AM
Sure can,my oldest brother used to do it on his 64 Fury back in the day. It was just a 383, but the MW exhaust system was way better than the factory log manifolds.
Posted By: draginmopars
Re: Cast iron headers for max wedge heads - 01/18/14 10:52 AM
a tall valve cover will hit on the passengers side
this was pieces / parts for a rat rod- car hauler build, later went to a cummins/5 speed
on a 68 satellite the master cylinder had to be moved (toward the outside) 2 "
this was pieces / parts for a rat rod- car hauler build, later went to a cummins/5 speed
on a 68 satellite the master cylinder had to be moved (toward the outside) 2 "
Posted By: 340SHORTY
Re: Cast iron headers for max wedge heads - 01/18/14 11:41 AM
you cant run power brakes. 
Posted By: Supercuda
Re: Cast iron headers for max wedge heads - 01/18/14 04:02 PM
Quote:
you cant run power brakes.
Yes, you can. He's obviously not building a stock setup so that opens up many options.
Posted By: calexan
Re: Cast iron headers for max wedge heads - 01/19/14 05:24 AM
thanks for the replies. i'm going to put them on a 440 in a Plymouth Sport Fury. i haven't seen the car yet but if it power brakes, i can convert. Charles
Posted By: 383man
Re: Cast iron headers for max wedge heads - 01/19/14 10:21 AM
They are cool for the Max Wedge look but they are heavy and hold heat longer then headers. I was going to use them but decided it was easier to just use headers and the headers make a bit more power. Ron