Posted By: spurman
Schubeck/SM compsite lifters? - 01/13/14 04:07 AM
Do they still exist? Anybody else make something like them?
Schubeck/SM compsite lifters?
Posted By: Kern Dog
Re: Schubeck/SM compsite lifters? - 01/13/14 07:21 AM
About a year ago I heard that another company bought the rights to the composite formula. The $$$ I recall hearing was about $800 for a set of solid lifters!
I decided to pass on the idea.
I decided to pass on the idea.
Posted By: 70AARcuda
Re: Schubeck/SM compsite lifters? - 01/13/14 07:46 AM
smith machine in utah
541-942-5921
Good luck...lol
541-942-5921
Good luck...lol
Posted By: OhioMopar
Re: Schubeck/SM compsite lifters? - 01/14/14 12:30 AM
Quote:
About a year ago I heard that another company bought the rights to the composite formula. The $$$ I recall hearing was about $800 for a set of solid lifters!
I decided to pass on the idea.
I was thinking the other day about looking for a set... I guess I should let that idea pass as well...
Posted By: ahy
Re: Schubeck/SM compsite lifters? - 01/14/14 01:05 AM
In terms of "belt and suspenders" for a FT cam, good oil is first. EPDM drilled lifters help also, then nitriding the cam. I think I would do the above before spending $800 on the composite lifters... and hoping quality problems were worked out.
Posted By: spurman
Re: Schubeck/SM compsite lifters? - 01/14/14 06:58 AM
Sounds like roller is the way to go....
Posted By: ScottSmith_Harms
Re: Schubeck/SM compsite lifters? - 01/14/14 07:05 AM
I have one of the last sets for a small block that Shubeck made, I went in a different direction and never used them, still have them mint in the original box if interested, just PM me (and no, not cheap, but not $800.00 either!)