Posted By: minivan
Choke linkage pic needed - 12/21/08 07:59 PM
Stock 67 440 with the original carter and choke. Not sure what type of "locking clip" hooks the rod from the choke onto the carb? No help from the SM or parts houses.. Any help or pics on here?? Thanks
Posted By: John_Kunkel
Re: Choke linkage pic needed - 12/21/08 10:34 PM
It's called a throttle rod clip and they're made in both left hand and right hand versions; can't remember which one the choke rod takes but the link below shows what they look like:
http://cgi.ebay.com/ebaymotors/Throttle-...4QQcmdZViewItemThe HELP section in most auto supplies will have these.
Posted By: minivan
Re: Choke linkage pic needed - 12/22/08 08:05 PM
John, I haven't been able to find any small enough to fit my linkage.. I was told this is what I need but no one seems to make the small size I need.. Any suggestions??
Posted By: John_Kunkel
Re: Choke linkage pic needed - 12/22/08 08:44 PM
The clips in the e-bay link specify that they are for a 3/16" rod, the choke rod is closer to 1/8" but the link does show what they look like.
Mister G's might have the correct clips:
http://www.mrgusa.com/
Posted By: minivan
Re: Choke linkage pic needed - 12/22/08 09:23 PM
That has been my problem, can't find the 1/8" ones and the catalogs do not show them either.. Thanks...