Posted By: RIX66
Chassis Crossmember - 11/11/13 07:40 PM
Does anyone know where I can get cap sections for the outboard ends of the torsion bar cross member? I did this repair about 25 years ago and the outboard ends (from the torsion bar to the outer body at the rocker panel) were available. The cross member is in good shape except for about 2" from the body tie-in area. I've looked at most of the suppliers, but all they offer is the entire cross member. I recently bought a 67 Belvedere I in really nice shape, except for the cross member ends. Thanks again for the help!