Posted By: DAMOPARS
72 Charger 318 Bolt Pattern - 12/18/08 07:53 PM
What size bolt pattern would be on a 72 Charger 318 drum brakes? Thanks
Posted By: Ply72rr
Re: 72 Charger 318 Bolt Pattern - 12/18/08 07:59 PM
4 1/2 inch bolt circle,1/2 inch right hand thread studs.
Posted By: DAMOPARS
Re: 72 Charger 318 Bolt Pattern - 12/18/08 08:13 PM
I am selling some wheels and this guy is measuring his wheels and says they are 4 inch?
I thought they were 4 1/2 also. I just want to make sure of this before I sell him these wheels.
Posted By: RTDaddy
Re: 72 Charger 318 Bolt Pattern - 12/18/08 09:35 PM
What are/were his wheels on? I think pre-72 A bodies carried the 4" DBC.
"IF YOU'RE UNDER CONTROL, YOU AIN'T GOING FAST ENOUGH."
Posted By: buildanother
Re: 72 Charger 318 Bolt Pattern - 12/18/08 10:44 PM
Ain't no 4 inch bolt pattern on that there B body.. As said, 4.5 inch it is.
Posted By: dustpan man
Re: 72 Charger 318 Bolt Pattern - 12/19/08 05:11 AM
on the b bodys its 5 on 41/2 in the abodys is 5 on 4 in
Posted By: DaytonaTurbo
Re: 72 Charger 318 Bolt Pattern - 12/19/08 05:16 AM
If they fit on your charger they are 5 x 4.5"ers. If he's getting 4" he's not measuring right.
Posted By: RapidRobert
Re: 72 Charger 318 Bolt Pattern - 12/19/08 05:22 AM
take your tape or a small steel scale & measure from the back side of any hole & measure over to the center of the hole that's 2 holes away
Posted By: patrick
Re: 72 Charger 318 Bolt Pattern - 12/19/08 04:16 PM
all drum brake A bodies are 4" BC (thru 76)
all pre-73 A bodies are 4"
all other car lines (except earlier imperials) are 5x4.5...early imperials (pre '67 pre '73?) are 5x5