Posted By: funkyjbp
413 cam lifter swap - 09/19/13 08:41 PM
everyone, hate to be such a rookie! I've never messed with a 413 internally. It has the funky small end pushrods and lifters in it now. i want to put a comp cams XE268 cam and lifter combo in it (already have the set). can i simply sway out the funky pushrods and use a set of 440 ones? thanks, Jp in the land of Oz.
Posted By: Dodgem
Re: 413 cam lifter swap - 09/19/13 08:50 PM
Should be able too basically the same motor.
Posted By: JohnRR
Re: 413 cam lifter swap - 09/19/13 09:02 PM
Yes you can, same engine family.
Posted By: therocks
Re: 413 cam lifter swap - 09/19/13 09:42 PM
I agree.Did a swap on a lot of them.My kids 52 300 is one.We ran Summits pushrods for a RB.Check your rockers close also.They have a habit of wallowing out.Rocky
Posted By: Supercuda
Re: 413 cam lifter swap - 09/19/13 10:55 PM
You can run the small diameter pushrods if you want. But you cannot run the larger diameter ones with the smaller lifter setup.
To be honest, push rods are cheap enough that it's probably best to update to the later ones from a 440.