Posted By: Seth_Jones
TTI small block shorty headers - 09/04/13 01:33 AM
Anybody install these yet on an 67-76 a-body with a small block? My uncle is putting a set on his 69 valiant and the right side fits like a glove. The left side collector flange is almost touching the top of the frame rail and proportioning valve. He is calling them in the morning to see if they sent the wrong header,its that bad.
Posted By: 471Magnum
Re: TTI small block shorty headers - 09/04/13 03:18 AM
First thing TTi is going to ask is if you've got good motor mounts.
Posted By: Seth_Jones
Re: TTI small block shorty headers - 09/04/13 01:12 PM
The engine is in the right place according to TTi's measurements.
Posted By: Seth_Jones
Re: TTI small block shorty headers - 09/04/13 07:03 PM
Spool k-member out of a 73 dart sport.The engine would have to move a couple inches up and to the passenger side to help this problem.The rear tube is close enough to the steering column that I think it will melt the plastic insert where the steering shaft exits the column.Looks like the coulmn shift linkage will need modified as well even though tti's website states these work with column shift.