Lenco Transmission info for a 1966 plymouth satellite.

I was wondering if anyone out here is using or has any lenco trans info on what it takes to put one in a 66 B-Body thanks for any help.

You will have to cut a very large hole in the floor and trim the trans cross member to clear the Lenco. Other than that you can get a bellhousing from several sources and use whatever clutch/pp to suite you application.

There's a member here who put one in a Challenger with a Hemi & made Car Craft or Hot Rod mag with it 30 years ago or so.
Maybe he will chime in on the experience

Thanks for the info.

Do you really NEED a Lenco or do you just like the idea of pulling levers like the old Pro-Stock videos? I could think of a few other options that I would spend 8-10 grand on myself
Go to www.umtrnorth.com for some answers.
Gus