Moparts

/6 cable

Posted By: bonefish

/6 cable - 08/28/13 01:44 PM

wheres the best place to pic up a /6 throttle cable.i went to my local dodge dealer and the girl at the parts counter looked at me like i was from outerspace(witch i actually am but she doesnt know that.)
Posted By: therocks

Re: /6 cable - 08/28/13 03:15 PM

They were still avaliable last time I checked a few years ago.Here they can still be had in junk yards.When we scraped the Dart I used its cable on my 65.Had to modify the pedal part to fit the 65 pedal though.Rocky
Posted By: AndyF

Re: /6 cable - 08/28/13 06:16 PM

You have to find a parts counter where they know how to look up old part numbers.

Last time I looked for a long throttle cable the /6 ones were all disco but the cable for an early 80's pickup truck was roughly the same length and had the same ends. So that one bolted in and work just fine.
Posted By: In_The_Pink

Re: /6 cable - 08/28/13 06:26 PM

I bet you'd have good luck over at slantsix.org
Posted By: scratchnfotraction

Re: /6 cable - 08/28/13 09:42 PM

Quote:

wheres the best place to pic up a /6 throttle cable.i went to my local dodge dealer and the girl at the parts counter looked at me like i was from outerspace(witch i actually am but she doesnt know that.)




I have one from a /6 truck you can have.

I used the /6 truck throttle cable on my 68 Dart when I went to a 4/v intake on the 318.

PM me if you want it.
Posted By: scratchnfotraction

Re: /6 cable - 08/29/13 02:28 AM

here you go.

i scratched up 3 from the shed.

right side on the carb plate measures 15"

middle one measures 16"

left one measure 20"



Attached picture 7831426-throttlecable1.jpg
Posted By: scratchnfotraction

Re: /6 cable - 08/29/13 02:29 AM

firewall end with a strip lock in place.

Attached picture 7831429-throttlecable2.jpg
Posted By: 340SHORTY

Re: /6 cable - 08/29/13 03:41 AM

did you try Rock Auto ??
Posted By: slantzilla

Re: /6 cable - 08/29/13 07:26 AM

Some of the K car cables will work too.
Posted By: bonefish

Re: /6 cable - 08/29/13 12:19 PM

Quote:

here you go.

i scratched up 3 from the shed.

right side on the carb plate measures 15"

middle one measures 16"

left one measure 20"




© 2024 Moparts Forums