Posted By: mcat4321
power to manual steering adapter - 08/20/13 11:38 PM
are there more than one option for this piece?
seems a little pricey?
thanks
Posted By: 383man
Re: power to manual steering adapter - 08/21/13 01:56 AM
I bought this small 2" or so shaft from Mancini to make up the difference for the longer shaft needed for manual steering boxes. I believe it was about $115. Ron
Posted By: 19SuperBee70
Re: power to manual steering adapter - 08/21/13 04:44 PM
I extended the shaft, redrilled the holes for the plAstic pins and put new pins in. Works fine.
Posted By: Dodgem
Re: power to manual steering adapter - 08/21/13 05:11 PM
Posted By: burdar
Re: power to manual steering adapter - 08/21/13 05:16 PM
The K-member I just bought came with a manual box and the inner part of the steering column still attached. Will I be able to just remove the inner shaft from my existing steering column and slide in the one that's still attached?
Posted By: burdar
Re: power to manual steering adapter - 08/21/13 06:35 PM
The inner part of the collapsible tube has been pulled out. The outer half stayed with the car I assume.
Posted By: mopowers
Re: power to manual steering adapter - 08/21/13 06:53 PM
So you only have the lower half of the shaft???
Posted By: krisiesmopes
Re: power to manual steering adapter - 08/21/13 07:00 PM
Not sure if Chrysler has it anymore, it was 4037651, but about 2 bills last time I checked.