Posted By: Brian_wo
Factory spade terminals (where to buy) - 08/19/13 01:07 AM
Anybody know where to buy these things new? They sell wiring new with them on there,here is a picture with two of them.
Factory spade terminals (where to buy)
Posted By: 62maxwgn
Re: Factory spade terminals (where to buy) - 08/19/13 02:02 AM
NAPA,buy them in bulk,cheaper that way..
Posted By: OzHemi
Re: Factory spade terminals (where to buy) - 08/19/13 02:03 AM
....or, I have bought them from Terminal Supply Co. (in MI from memory) in the past too. 
Posted By: MPerry
Re: Factory spade terminals (where to buy) - 08/19/13 02:06 AM
Those look like the same ones used in gm bulkheads.
Posted By: MPerry
Re: Factory spade terminals (where to buy) - 08/19/13 02:09 AM
Posted By: Brian_wo
Re: Factory spade terminals (where to buy) - 08/19/13 02:11 AM
so what is the actual name for them? I could show them that same picture and say find me these but I might be there a while.
Posted By: RapidRobert
Re: Factory spade terminals (where to buy) - 08/19/13 02:12 AM
NAPA 725145 female 725147 male (packard 56 type). $$$
Posted By: Brian_wo
Re: Factory spade terminals (where to buy) - 08/19/13 02:19 AM
thank you,I will go check Napa.
Posted By: moparfan53
Re: Factory spade terminals (where to buy) - 08/19/13 02:47 AM
Quote:
thank you,I will go check Napa.
In case you have problems at Napa, I have bought them from Carquest before. I don't recall which part# on the box in the pic below (10172/CG8) was on the receipt.
Posted By: mopars4ever
Re: Factory spade terminals (where to buy) - 08/19/13 02:59 AM
I have a few. How many do you need?
Posted By: 62maxwgn
Re: Factory spade terminals (where to buy) - 08/19/13 03:12 AM
Quote:
http://www.pcsconnectors.com/packard56.aspx?page=2
There are half that price at NAPA,last I bought were $0.15 and $0.17 ea.And you really should have the correct crimping tool.
Posted By: Brian_wo
Re: Factory spade terminals (where to buy) - 08/19/13 05:09 AM
Well I have been helping a guy rewire a car with stuff we found on ebay and much of it was in bad shape,would have been much easier to fix with new connectors instead of trying to pry open the crimps,solder new wire to old and recrimp the outer most crimp,basically after that I just want to buy a box of these things and have them on hand for later when I start going through my own wiring.
I will get some bought this week and try to find the crimp tool also,thx guys.
I will get some bought this week and try to find the crimp tool also,thx guys.
Posted By: BTTG
Re: Factory spade terminals (where to buy) - 08/19/13 12:30 PM
have a source or part number for the crimp tool?????
Posted By: TJP
Re: Factory spade terminals (where to buy) - 08/19/13 03:18 PM
terminal supply or PCS connectors will have both the terminals and crimpers
Posted By: Brian_wo
Re: Factory spade terminals (where to buy) - 08/20/13 01:29 AM
Napa/Belden part number is no longer good,new company wants $.99 each!
Posted By: TJP
Re: Factory spade terminals (where to buy) - 08/20/13 02:24 AM
Posted By: mopar4ya
Re: Factory spade terminals (where to buy) - 08/20/13 02:38 AM
Cole Hersee company also has them. I have also bought them from a company in Cincinnati, J & N Auto Electric. You have to be a dealer to buy from them, but if you give them a call they should be able to advise you where your nearest dealer would be.
Dan
Dan
Posted By: dstryr
Re: Factory spade terminals (where to buy) - 08/20/13 02:44 AM
Posted By: Supercuda
Re: Factory spade terminals (where to buy) - 08/20/13 02:52 AM
Posted By: RapidRobert
Re: Factory spade terminals (where to buy) - 08/20/13 02:59 AM
Quote:that's what NAPA got me for the last time I was in there. The time before that they were ~50 cents
Napa/Belden part number is no longer good,new company wants $.99 each!
Posted By: m88mark
Re: Factory spade terminals (where to buy) - 08/20/13 03:13 AM
Accel, got 4 sets of interchangeable jaws, ratchets. Just looked no # but has yellow handles, well made. Can't remember exact $ but was a little pricey but sure works well!
Posted By: mopwrd340
Re: Factory spade terminals (where to buy) - 08/20/13 05:58 AM
I bought mine from the a place called the terminal repair store i bought 50 ea the male one was like $12 for 50 . i also have the crimper for these they say packard on them they are a ratcheting and do the double crimp for these terminals . i bought a nice used dash harness replaced all of the ends at the bulkhead and replaced the ends for the light and wiper harness ,
Posted By: jlatessa
Re: Factory spade terminals (where to buy) - 08/20/13 01:22 PM
Terminal Supply, they have everything.
I bought a kit from them for automotive applications
that was great when rewiring our Charger.
Joe
I bought a kit from them for automotive applications
that was great when rewiring our Charger.
Joe
Posted By: krisiesmopes
Re: Factory spade terminals (where to buy) - 08/20/13 01:39 PM
The females are 2427736 and come the same way.
Posted By: BTTG
Re: Factory spade terminals (where to buy) - 09/11/13 02:38 PM
Just to confirm before purchasing...
this tool will crimp both male and female packard 56 terminals on mopar wiring harnesses?
http://www.amazon.com/SARGENT-Tools-1028...=I23NYY2UQ7C6T0
this tool will crimp both male and female packard 56 terminals on mopar wiring harnesses?
http://www.amazon.com/SARGENT-Tools-1028...=I23NYY2UQ7C6T0
Posted By: RobX4406
Re: Factory spade terminals (where to buy) - 09/11/13 04:12 PM
Posted By: Brian_wo
Re: Factory spade terminals (where to buy) - 09/11/13 11:37 PM
Quote:
Just to confirm before purchasing...
this tool will crimp both male and female packard 56 terminals on mopar wiring harnesses?
http://www.amazon.com/SARGENT-Tools-1028...=I23NYY2UQ7C6T0
did you see somewhere that it works with packard 56 terminals? all the tools I found were pricey.
Posted By: Supercuda
Re: Factory spade terminals (where to buy) - 09/11/13 11:40 PM
Quote:
Just to confirm before purchasing...
this tool will crimp both male and female packard 56 terminals on mopar wiring harnesses?
http://www.amazon.com/SARGENT-Tools-1028...=I23NYY2UQ7C6T0
Looks more like it's for Stakon connectors, not P56's.
Posted By: BTTG
Re: Factory spade terminals (where to buy) - 09/12/13 12:35 PM
Read here that it does... However the product number was NOT given by the apparently very knowledgeable poster describing the crimp process... Since it was not firsthand I did not want to assume the other poster was correct...
http://www.thegaragegazette.com/index.php?topic=2924.0
As far as I can tell the sargent one does look like it is similar to the one above posted by 62maxwgn
Again just want to confirm before spending $30... I can't afford the full duty versions which are big $$'s as i won't use often...
TIA
http://www.thegaragegazette.com/index.php?topic=2924.0
As far as I can tell the sargent one does look like it is similar to the one above posted by 62maxwgn
Again just want to confirm before spending $30... I can't afford the full duty versions which are big $$'s as i won't use often...
TIA