alum. heads for 520 wedge

Posted By: maxwedge1

alum. heads for 520 wedge - 08/15/13 11:48 PM

lookin for a recipe for gasoline pulling truck.
considering a 520" steel crank short block from one of the reputable vendors out there running around 12.5:1cr.
need a torquey cam/head combo that will start pullin at 2500 up to 6500 mayb 7000 and make in the neiborhood of 700hp/750 tq.
nothin exotic or high maintainence, a good mid level head/valve train with maybe a base cnc port job and solid cam.

Posted By: AndyF

Re: alum. heads for 520 wedge - 08/16/13 02:56 AM

That isn't too difficult of a task to accomplish. Call Dwayne at Porter Racing Heads and just follow his advice. He'll set you up with a set of heads and a cam that will make the power that you want.

Posted By: bonefish

Re: alum. heads for 520 wedge - 08/16/13 03:26 AM

Quote:

That isn't too difficult of a task to accomplish. Call Dwayne at Porter Racing Heads and just follow his advice. He'll set you up with a set of heads and a cam that will make the power that you want.

i,ll second that.Dwayne Porter has allways done me right,my stuff kiks but.

Posted By: 383man

Re: alum. heads for 520 wedge - 08/16/13 07:40 PM

Quote:

Quote:

That isn't too difficult of a task to accomplish. Call Dwayne at Porter Racing Heads and just follow his advice. He'll set you up with a set of heads and a cam that will make the power that you want.

i,ll second that.Dwayne Porter has allways done me right,my stuff kiks but.

X3.......I agree as I bought my EZ heads from Dwayne and he did a little of his magic to them. Great guy to deal with. Ron