68 Charger Vacuum line grommet reproductions?

Anyone reproduce the rubber firewall grommet where the vacuum lines pass through on 68 or 69 Charger? I was looking at mine yesterday and it is very worn, enough to have engine compartment fumes pass through as I poked a few smaller holes to wire God knows what 10 years ago. I know I can probably find a body plug the same size and drill some holes but I dont want it to look like I did just that. I researched it a bit on line but couldnt find what I was looking for. Anyone know if its being reproduced? If not any tips on making a clean job of a universal grommet? Thanks!

Can you post a picture of one? I might have one or two in a box with old wiring harness/vacuum hose stuff back in the garage.

Jim

Thanks Jim, I couldnt find on on line and mine is at home, here is one thats very close, but the one I need has 3 holes.

Got it - I'll check as soon as I get home this afternnon.

Jim

No luck on the part. I was pretty certain I had one or two since I had parted out a few Chargers many years ago. I did find a two hole one like in the picture. I hope someone else will check their stash and help you out.

Good Luck,
Jim

No worries Jim, really appreciate you checking though!

Mike