'E' body 4 speed question

I'am trying to determine if a 'E' body clutch rod( the rod that connects the z bar to the pedals) is 15" overall length tip to tip and pretty much flat on one end and about a 1/2" offset on the other end ?

Brewers says its 15" overall, and there is a picture.
http://brewersperformance.com/proddetail.asp?prod=CPR696

I switch my 1970 Barracuda(383 car with a 426 hemi and 4 speed) to the Mopar A body A motor rod kit years ago, that ended the clutch rod problems I was having