Fender mounted turn signal wiring

71 Plymouth B Body: Just trying to figure out how to properly route the wiring from the fender mounted turn signals as they come down into the wheel well. Seems like the connector mates to the wiring from the from the front parking lights and that is via an opening in the front of the wheel well.

Is that right? What keep the wiring from being eaten up by the wheel? Anyone have pics or an explanation?

Thanks,

Steve

Not sure about your '71, but on my '68 there is an inner fender piece that needs to be removed to install the lights. After hooking the lights up, re-install this small piece and the wheels will never get close to contact. On mine, if you look up into and to the front of the wheel well, you can see the covering that Im talking about.