Any thoughts on these 360 roller rockers?

Posted By: JoesMopar

Any thoughts on these 360 roller rockers? - 07/12/13 11:30 PM

http://www.summitracing.com/parts/cca-rp1622-16/overview/make/dodge

Anyone use/have any experience with these? Good? Junk? I thought they might be a good buy for my 408.

Thanks

Posted By: Dan Halen

Re: Any thoughts on these 360 roller rockers? - 07/13/13 01:59 AM

Comp rockers should hold up, but I thought Magnum 360s could use

Chevy spec. rocker arms saving a ton of money.

Posted By: Michael Ecks

Re: Any thoughts on these 360 roller rockers? - 07/13/13 02:49 AM

Quote:

but I thought Magnum 360s could use Chevy spec. rocker arms saving a ton of money.

The "Magnum" in the description is the Comp Magnum line, not indicating they are Magnum engine design. It always annoys the crap out of me when someone like summit shows a "representative image of the part" !!! Shame on you summit.

Here...
Same part on Amazon
They appear to have a picture of the actual part complete with LA style shafts etc, and will save you about 140 bucks.

Posted By: d-150

Re: Any thoughts on these 360 roller rockers? - 07/13/13 02:49 AM

e-brock can use chevy but not sure of factory heads

Posted By: 70AARcuda

Re: Any thoughts on these 360 roller rockers? - 07/13/13 05:34 AM

if they are iron heads take a look at these..

http://www.hughesengines.com/Index/produ...mp;partid=25628

Posted By: JoesMopar

Re: Any thoughts on these 360 roller rockers? - 07/13/13 05:49 AM

The heads are the edelbrock SB heads.

Posted By: JoesMopar

Re: Any thoughts on these 360 roller rockers? - 07/13/13 05:49 AM

Quote:

Quote:

but I thought Magnum 360s could use Chevy spec. rocker arms saving a ton of money.

The "Magnum" in the description is the Comp Magnum line, not indicating they are Magnum engine design. It always annoys the crap out of me when someone like summit shows a "representative image of the part" !!! Shame on you summit.

Here...
Same part on Amazon
They appear to have a picture of the actual part complete with LA style shafts etc, and will save you about 140 bucks.

Thanks a ton.

Posted By: 70AARcuda

Re: Any thoughts on these 360 roller rockers? - 07/13/13 06:05 AM

Quote:

The heads are the edelbrock SB heads.

might have been more useful if you had state in the first post that you head eddy LA heads..