70 duster. Headers that fit.

Has anyone found a header for a 70 duster with a 360 that has power steering that will fit without hitting the the steering? This is a mild street car so I`am thinking 1 5/8 or 1 3/4 tubes.

Don't know about your A body in particular, but I just put some Doug's headers in my 71 B body. Fit and finish is fantastic. They go above all the steering linkage and easily clear the power steering. Nice thick phalanges. I was originally looking at the cheaper summit brand headers and the like. I'm sooooo glad I payed a little more for the Doug's, and they were still quite a but less than the TTI's, and seem to fit as well as I hear others say the TTI's fit. Ease of installation was worth it alone.

roe

Dougs, tti or some shorties (that fit)

Dougs are usually the least expensive of the bunch and are nice headers.

I'm actually running Hedmans,72 Duster w/PS,no issues. No dinging or bending,had the engine in and out a couple timess with no help.Got my T-bars cranked down pretty good and been over numerous speed breakers with no dragging. I have Edelbrock heads and Schumacher poly mounts if that makes any difference. I have heard complaints about them,but I don't have any...maybe I just got a good set

They all seem to hit the box My best luck was with early Hooker headers they still hit but were adjusted with a short sledge

1970 Duster 360 727 Headmans
Looking up from drivers side. I should have dented them before installing them.