Posted By: CharlieB
Valve cover gasket ? - 03/05/13 10:03 PM
I've got a slight leak at my valve cover gasket (1969 383 HP). Looking at a felpro set. What material cork/rubber and thickness or brand do you recommend? Thanks in advance
Valve cover gasket ?
Posted By: amxautox
Re: Valve cover gasket ? - 03/05/13 10:11 PM
metal with rubber covering, they are also reusable, works great for me.
can be bought at your local Chrysler dealer, or used to be able to.
I'll find a link to the place I've bought them, stand by.
can be bought at your local Chrysler dealer, or used to be able to.
I'll find a link to the place I've bought them, stand by.
Posted By: amxautox
Re: Valve cover gasket ? - 03/05/13 10:12 PM
Posted By: CharlieB
Re: Valve cover gasket ? - 03/06/13 01:35 AM
Thank you sir
Posted By: therocks
Re: Valve cover gasket ? - 03/06/13 11:29 AM
Ive used the black ones they make.The best Ive used though are Mr Gasket Ultra seals.I get about 4 or 5 valve adjustments before they need replaced.Rocky
Posted By: tboomer
Re: Valve cover gasket ? - 03/06/13 02:59 PM
Check this guy out. He is a Moparts sponsor and has some pretty good stuff!! 
http://www.superformanceproducts.com/
http://www.superformanceproducts.com/
Posted By: Triggerfish
Re: Valve cover gasket ? - 03/06/13 03:26 PM
I just went thru problem on my 70 383. First, make sure your covers are straight & bolt holes aren't pushed in allowing leaks. I used the Felpro cork/rubber (1610 I think?) gaskets & finally switched covers to MT diecast aluminum ones & got the Moroso Perm-Align #93055
rubber & steel gaskets. Expensive at $38, but they did the trick.
rubber & steel gaskets. Expensive at $38, but they did the trick.