440 in a Dart, header question???

Posted By: BLUECUDA

440 in a Dart, header question??? - 11/23/08 07:28 PM

Ok lets say you have a 71 Dart with a 440 and eddy aluminum heads. Who makes under chassis headers? and how big can you get them in. 1 3/4, 1 7/8, 2.0 ect. and if you can get them in 1 7/8 or bigger how hard is it to each the plugs? and what would be the cost on some of these headers? Has anyone here ever worked with a set of under chassis headers in a 70-72 440 Dart be for?

Posted By: Rhinodart

Re: 440 in a Dart, header question??? - 11/23/08 07:57 PM

www.bigblockdart.com has all your answers!

Posted By: RapidRobert

Re: 440 in a Dart, header question??? - 11/23/08 08:22 PM

Quote:

www.bigblockdart.com has all your answers!

Posted By: 383man

Re: 440 in a Dart, header question??? - 11/24/08 02:04 AM

We have a low deck 400 in my boys Dart that we use 2" CPPA headers. TTI makes them now but not sure how well they fit on the RB block. Ron

Posted By: autoxcuda

Re: 440 in a Dart, header question??? - 11/24/08 02:18 AM

Quote:

Ok lets say you have a 71 Dart with a 440 and eddy aluminum heads. Who makes under chassis headers? and how big can you get them in. 1 3/4, 1 7/8, 2.0 ect. and if you can get them in 1 7/8 or bigger how hard is it to each the plugs? and what would be the cost on some of these headers? Has anyone here ever worked with a set of under chassis headers in a 70-72 440 Dart be for?

Call Troy at Westoaks Mopar Performance at (800) 748-6118 ex 255

He is one of TTI's biggest sellers and has installed many sets himself. He knows the ins and outs and can tell you all the install tricks to save you from pulling your hair out.

He give Moparts members shipping discounts. TTI sets the price no matter who you buy them from.