Posted By: GTX MATT
Anyone make a stock style 1/2 inch pickup - 01/21/13 05:43 PM
Does anyone make a stock style 1/2 inch oil pickup so that you don't really need to worry about pickup to pan clearance?
Quote:To fit what
Does anyone make a stock style 1/2 inch oil pickup so that you don't really need to worry about pickup to pan clearance?
Quote:
B/RB With a '71 Hemi style repop pan. Would this also be the same for a 402 style pan?
Quote:Quote:
B/RB With a '71 Hemi style repop pan. Would this also be the same for a 402 style pan?
Mp sells the stock 1/2" pickup still for the 70 up 6qt pan , it's a straight tube so it will not fit a 402 pan , I don't think anyone makes one , it would be aftermarket , to fit a 402 pan. MP also sells one for the 66-69 hemi pan , I have to buy one , but I don't know if it's a straight tube or a bent tube.
If you haven't done it yet you don't need a 1/2" pickup in a B/RB unless it's something spinning 10,000 rpm or something like that. I made that mistake already , luckily I had a spare moroso 1/2" pickup tube I was able to cut up and adapt to a stock 402 pickup.