Anybody know what this trans crossmember goes to ?

Posted By: tippytoe

Anybody know what this trans crossmember goes to ? - 11/19/12 03:13 PM

I was cleaning out the garage yesterday & stumbled across this trans crossmember/mount. The trans mount has a large through-style bolt rather than the small stud & nut like am used to seeing on 68-70 b-bodys. I have seen these before but its been so long ago, I can't remember what vehicles had these (darn old age

!). The crossmember was very dirty so I couldnt read the part number. Any help would be appreciated.

Attached picture 7467879-novcl010.jpg

Posted By: moparmarks

Re: Anybody know what this trans crossmember goes to ? - 11/19/12 03:28 PM

Looks to be a 71/2B-E all trannys. What is the spacing of the mounting bolt holes?

Posted By: tippytoe

Re: Anybody know what this trans crossmember goes to ? - 11/19/12 03:35 PM

Quote:

What is the spacing of the mounting bolt holes?

I will have to check. I took it to the shop & forgot to bring it back home ( Darn memory again !

Posted By: tippytoe

Re: Anybody know what this trans crossmember goes to ? - 11/20/12 05:35 PM

Quote:

Looks to be a 71/2B-E all trannys. What is the spacing of the mounting bolt holes?

The two outer mounting holes are 18 inches apart (measured center to center of each hole). The inner mounting holes are 8&1/2 inches apart (center to center). The distance from the outer hole to the inner is roughly 5&3/4 inches (center to center).