Moparts
Cubic Inch Calculation
Posted By:
edl
Cubic Inch Calculation -
11/09/12
05:14 PM
in a stock 426 Hemi engine ('66), if it were bored 60 over, what would the cubic inches be? - thanks
Posted By:
Born2Run
Re: Cubic Inch Calculation -
11/09/12
05:24 PM
438
Posted By:
edl
Re: Cubic Inch Calculation -
11/09/12
05:45 PM
thanks
Posted By:
70Cuda383
Re: Cubic Inch Calculation -
11/09/12
06:14 PM
Take note:
Volume calculation of a cylinder:
Pi x R^2 x Height of cylinder.
aka. 3.14159 x (1/2 bore, squared) x stroke.
multiply by number of cylinders in engine, in this case... 8.
Posted By:
thehemikid
Re: Cubic Inch Calculation -
11/09/12
07:09 PM
..or Bore x Bore x .7854 x stroke
Posted By:
B5 Bee
Re: Cubic Inch Calculation -
11/09/12
07:46 PM
...or...
this calculator
Posted By:
RapidRobert
Re: Cubic Inch Calculation -
11/09/12
09:02 PM
bore X bore X stroke X .7854 X 8
Posted By:
BulletBob
Re: Cubic Inch Calculation -
11/10/12
02:05 AM
Quote:
..or Bore x Bore x .7854 x stroke
X the number of cylinders
© 2024
Moparts Forums